Fujitsu Siemens Computers C Series Easy Manual page 37

Battery indicators
The charging state of the batteries is shown with the two battery indicators. 1 indicates
that the information applies to the first battery in the battery compartment. 2 indicates that
the information applies to the second battery in the module bay.
indicates that the battery is 0%-25% charged.
indicates that the battery is 25%-50% charged
indicates that the battery is 50%-75% charged.
indicates that the battery is 75%-100% charged.
Indicates that the battery is too hot or too cold for charging.
The flashing frame indicates that the battery is flat.
Hard disk indicator
The hard disk drive of the notebook is being accessed.
Optical drive indicator
The indicator is lit when the CD/DVD in the optical drive is being accessed.
You must not remove the CD/DVD from the drive when this indicator is lit.
PC card indicators
The system accesses a PC Card.
NumLK indicator (Num Lock)
1
The [Num] key has been pressed. The numeric keypad is activated. The system will
display the symbols that are printed on the front of the keys.
CapsLK indicator (Caps Lock)
A
The Ï key has been pressed. All the characters you type appear in uppercase. In the
case of overlay keys, the character printed on the upper left of the key appears when that
key is pressed.
Scroll indicator (Scroll Lock)
The key combination [Fn] + [Scr] has been pressed. The effect this key has varies from
programme to programme.
A26391-K136-Z120-2-7619
Working with the notebook
27