Table of Contents
Advertisement
Use the jack handle extensions and
the wheel wrench to remove the
underbody-mounted spare tire.
A. Jack Handle Extensions
B. Jack
C. Jack Handle
D. Wheel Wrench
E. Wheel Blocks
1. Assemble the wheel wrench (D),
the jack handle extensions (A)
and the jack handle (C) as
shown.
2. Insert the chiseled end of the
jack handle (C) at a slight
angle through the hole in the
rear bumper and into the
funnel-shaped guide.
3. Turn the wheel wrench (D)
counterclockwise to lower
the spare tire to the ground.
Continue to turn the wheel
wrench until the spare tire can
be pulled out from under the
vehicle.
Advertisement
Table of Contents
