GMC 2011 GMG Canyon Owner's Manual page 276

Table of Contents

Advertisement

4. Fill the coolant recovery tank to
the FULL COLD mark.
5. Reinstall the cap on the coolant
recovery tank, but leave the
radiator pressure cap off.
6. Start the engine and let it run
until the upper radiator hose can
be felt getting hot. Watch out for
the engine cooling fan.
7. By this time, the coolant level
inside the radiator filler neck
might be lower. If the level is
lower, add more of the proper
DEX COOL coolant mixture
through the filler neck until the
level reaches the base of the
filler neck.
8. Then replace the pressure cap.
At any time during this procedure
if coolant begins to flow out of
the filler neck, reinstall the
pressure cap.
The vehicle has a coolant
temperature gauge displayed on
the instrument panel to warn if the
engine is overheating. See
. If the engine is too hot,
the air conditioning might stop
working. This is normal and helps
cool the engine.
If the decision is made not to lift the
hood when the warning appears, but
instead get service help right away.
See
or
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

2011 canyon

Table of Contents