Suggested Setups - Crate TAXI TX-30E Driver Manual

C R A T E T A X I • T X - 3 0 E
SUGGESTED SET-UPS:
The TX-30E can be used in a variety of different ways, some of which are
shown below and on the following page. Use these ideas to fuel your
imagination for the setup which best suits your needs.
Idea 1 – Play and sing, with effects: Plug a mic into Input 1 and an instru-
ment (acoustic or electric guitar, keyboard) into Input 2. (This high-Z input
works with all types of pickups, from Piezo to active types.) There are two
ways to connect an effects device - into the Insert jack ("A" below), or in
line with the microphone ("B" below). To connect the effects device into
the Insert jack choose one of the methods shown on page 7. (Note that
when the device is connected into the Insert jack the effect will be
applied to both input signals 1 and 2.)
Idea 2 – Play along: Plug a rhythm machine, CD player or tape player into
Input 1 and an instrument (acoustic or electric guitar or a keyboard) into
Input 2. The outputs of a CD/tape player must be summed to a mono sig-
nal with a 1/4" plug, as shown.
8
INPUT 1
INPUT 2
IN
INSERT
OUT
INPUT 1
INPUT 2
L OUT
R OUT
INPUT 1
IN OUT
L OUT
TO INPUT 2
CA9Y
DUAL RCA-TO-MONO
1/4" ADAPTER
R OUT