Advertisement
The tilt back legs lock flat against the cabinet
when not in use - tighten the securing fasteners
completely to eliminate rattling.
Crate's V30H amp head is designed to "piggy
back" mount onto the V212T enclosure. The V30H
has slide-out mounting hardware which lock onto
the posts on the top of the V212T. Loosen the
knobs on the posts, slide the amp in place and lock
down the knobs.
The piggy-backed amp can be rolled around
on its casters by the amp head's handle, but do
not try to pick the combo up by the amp head or
its handle.
The casters are to be removed before using the
cabinet in the tilt back mode. Swing each tilt back
leg into position and secure all hardware before
leaning the cabinet back. Do not allow the unit to
fall back on its own, rather, lower it into
position.(The cabinet should not be tilted back on
slick or smooth surfaces.)
V 2 1 2 T G U I T A R S P E A K E R E N C L O S U R E
Advertisement
