Advertisement
Your V-Series V212T 2x12 Guitar Speaker Enclosure is built from
the finest materials and components available. This cabinet is
loaded with two Tone Tubby speakers and comes standard with
casters, steel handles, heavy duty metal tilt back legs, Switchcraft
metal jacks on a metal input plate, and hardware for "piggy back"
mounting of the V30H V-Series guitar amplifier head.
The tilt back stands allow the cabinet to slant back at a 40
to improve your ability to hear yourself, especially on smaller
stages. Heavy duty fastening posts on the top of the enclosure are
provided for secure locking of the V30H amp head, resulting in a
piggy back combo amp that can actually be used in the tilt back
position.
The V212T also makes an excellent extension cabinet for any
V-Series guitar amplifier with a minimum load of 8 ohms.
1.Read, follow and keep these instructions. Heed all warnings.
2.This speaker is capable of producing high sound pressure levels that may cause
permanent hearing damage. User caution is advised and ear protection is recom-
mended during use.
3.This speaker is designed for use on a sturdy, level surface. Whenever stacking
speaker cabinets, do not stack more than two high. Only speaker cabinets which
are equipped with caster cups on their top surfaces are to be used underneath a
cabinet which is equipped with casters.
4.Speaker cables are a tripping hazard and must be routed out of traffic areas and
away from any possible accidental contact.
5.Do not expose this speaker to rain or moisture. Do not place liquid filled contain-
ers on this speaker. Clean only with a damp cloth.
6.Repair or service of this speaker should be performed only by qualified personnel.
V 2 1 2 T G U I T A R S P E A K E R E N C L O S U R E
IMPORTANT SAFETY INSTRUCTIONS:
o
angle
Advertisement
