Remote Control - Fujitsu Siemens Computers MYRICA V40-1 Owner's Manual

Remote control

1
2
4
5
7
8
10
11
13
17
20
A26361-K1070-Z120-1-M119, edition 1
1 = POWER - switches the device on or into
the standby mode.
2 = INFO - information
You display the current settings with this
3
button.
3 = MUTE - switches the sound on and off.
6
4 = PICTURE
With this button you select the picture mode.
9
5 = V.SIZE
With this button you select the picture format.
12
6 = SOURCE
With this button you select the signal source.
14
7 = SOUND
With this function you activate the sound
15
mode.
8 = S.MODE - You select the audio channel
16
with this button.
18
9 = STILL
19
With this button you stop the displayed picture
(still image) or switch back into the normal
playback mode again.
10 = DIGEST - With this button you display
the programme overview of all channels.
11 = Pre.PR - Changes back to the
programme previously set
12 = SLEEP - Sleep timer
By pressing this button several times, you set
the time after which the device is
automatically switched off.
13 = TEXT - Switches Teletext on or off
14 = EXIT - Closes the submenu or the OSD
menu
15 = PR - Changes the main display to the
next programme in the programme list
16 = MENU - Opens the OSD menu
17 = VOL - Decrease volume
18 = VOL - Increase volume
19 = PR - Changes the main display to the
previous programme in the programme list
20 = 0 - 9
With this button you select the programme
directly.
MYRICA V40-1
English - 21