Reversing T Hedoor - GE 495 Series Owner's Manual

About mveming the door.
Reversing the Door
Too/s needed,
[] Standard#2 [] Tape-tipped
Phillipsscrewdriver puttyknife
[] Needle-nosed
pliers
F_Open the door and remove the filler plugs opposite the hinges. With tim door
completely open, remove the bottom sc_ew fk'om each hinge on the (hyer f:ace. Insert
these screws about halfway into the lOP holes, for each hinge, on the opposite side
(where you removed the filler plugs). Apply firm pressure to get the screw started in
untapped holes.
_-] Loosen top screw from each hinge on the duer face halfway. With one hand holding
the top of the door and the other hand holding the bottom, remove the door fi'om the
duet by lifting it UPand OUT
[-_-]Rotate the door 180 °. Insert it on the opposite side of the opening by moving the door
IN and DOWN until the top hinge and the bottom hinge are resting on the top screws
inserted in step 1.
[_ Remove the remaining screws fi'om the side of the opening fi'om which the door was
removed. With these screws secure each hinge at the bottom. Tighten the two top
screws of each hinge. Reinsert the plastic plugs on the side fi'om which the door was
removed.
10