Bluetooth (Overview); Recognition - Buick 2013 Regal Owner's Manual

Pair cell phone(s) to the vehicle.
The system may not work with
all cell phones. See Pairing in
this section for more information.
If the cell phone has voice
dialing capability, learn to use
that feature to access the
address book or contact list. See
Voice Pass-Thru in this section
for more information.
See Storing and Deleting Phone
Numbers in this section for
more information.
When using a cell phone, it can
be distracting to look too long or
too often at the screen of the
phone or the infotainment
(navigation) system. Taking your
eyes off the road too long or too
often could cause a crash
resulting in injury or death.
Focus your attention on driving.
Vehicles with a Bluetooth system
can use a Bluetooth-capable cell
phone with a Hands-Free Profile to
make and receive phone calls. The
infotainment system and voice
recognition are used to control the
system. The system can be used
while in ON/RUN or ACC/
ACCESSORY. The range of the
Bluetooth system can be up to 9.1 m
(30 ft). Not all phones support all
functions and not all phones work
with the Bluetooth system. See
www.gm.com/bluetooth for more
information about compatible
phones.
Use the buttons located on the
infotainment system and the
steering wheel to operate the
Bluetooth system.
answer incoming calls, confirm
system information, and start voice

recognition.

end a call, reject a call, or cancel an
operation.
If equipped, the infotainment system
allows certain controls to be
selected on the infotainment display.
For information about how to
navigate the menu system using the
infotainment controls, see
enter the Phone main menu.
Press to mute audio.
The voice recognition system uses
commands to control the system
and dial phone numbers.
recognize voice commands if there
is too much background noise.
Press to
indicate that the system is ready for
a voice command. Wait for the tone
and then speak.
Press to
.
Press to
The system may not
A tone sounds to