Bosch SGV45E03UC Use & Care Manual page 14

Hide thumbs Also See for SGV45E03UC:
Table of Contents

Advertisement

Available languages

Available languages

Figure 21
Figure
22
Figure
23
Figure 24
To open
- turn
counterclockwise.
Check/Clean
the Stainless
Steel
Inner
Door and Tub
Clean the outer edges of the inside door panel regularly
to remove
debris that might
collect
there from
normal
loading.
If spots begin to appear on the stainless
steel tub or inner door, make sure the rinse agent
reservoir
is full.
Check/Clean
the Spray Arm
Nozzles
Occasionally
check the spray arms to ensure that the spray arm nozzles (holes)
are
unobstructed.
You must remove
the spray arms to check them
for obstruction.
To remove
the top spray
arm:
1.
Remove the empty
top rack from the dishwasher.
2. Turn the rack upside-down.
The top spray arm is held in position
by a locking
nut as
shown
in Figure 21A. Turn the locking
nut counter-clockwise
1/8 turn and remove
it,
as shown
in Figure 21B to release the spray arm.
3.
Remove the spray arm as shown
in Figure 22.
4.
Look for obstruction
in the spray nozzles.
5.
If the spray nozzles
need cleaning,
flush them
under running
water.
To reinstall
the top spray
arm:
1.
Return the top spray arm to its installed
position.
2.
Return the locking
nut to its installed
position
and turn
it 1/8 turn clockwise.
3.
Return the top rack to the top rack roller
guides.
To remove
the bottom
spray
arm:
1.
Remove the empty
bottom
rack from the dishwasher
tub.
2. Grasp and lift the bottom
spray arm
as shown
in Figure 23.
3.
Look for obstruction
in the spray nozzles.
4.
If the spray nozzles
need cleaning,
flush them
under running
water.
To reinstall
the bottom
spray arm:
1.
Return the bottom
spray arm to its installed
position
and press it so that it snaps into
place.
2.
Return the bottom
rack to its installed
position.
Check/Clean
the Filter
System
This dishwasher
has a filter
system that consists
of a Large Object
Trap/Cylinder
Filter
assembly
and a Fine Filter. Select models
have an additional
Micro Filter. The filter
system
is
located
on the inside of your dishwasher
under the lower
rack and is easily accessible.
During
normal
use, the filter
system
is self-cleaning.
You should
occasionally
inspect
it for
foreign
objects
and clean it when
necessary.
CAUTION
To avoid injury, do not reach into the large object trap with your fingers. The large
object trap could contain sharp objects.
This dishwasher has a filter system that consists of a Large Object Trap/Cylinder Filter
assembly and a Fine Filter. The filter system is located on the inside of your dishwasher
under the lower rack and is easily accessible.
During normal use, the filter system is self-cleaning. You should occasionally inspect it for
foreign objects and clean it when necessary.
To Remove
the Large
Object
Trap/Cylinder
Filter
Assembly:
1. Remove the bottom rack.
14

Advertisement

Table of Contents
loading

Table of Contents