Connecting To The Tv; Reconnecting The Smart Touch Control; Battery Low Alarm - Samsung UN55F9000AF E-Manual

Connecting to the TV

In order to operate the TV using a Smart Touch Control, you must first pair it to the TV via Bluetooth.
However, the Smart Touch Control is only available for the paired Samsung TV.
11
Point the Smart Touch Control toward the IR sensor of the TV, and press
Touch Control. The remote control receiver's location may vary depending on the model.
21
A Bluetooth icon will appear at the bottom left of the screen as shown below. The TV will then
attempt to connect to the Smart Touch Control automatically.

Reconnecting the Smart Touch Control

If the Smart Touch Control stops operating or works abnormally, replace the battery as this may
be caused by insufficient battery power. If the problem persists, press the PAIRING button on the
Smart Touch Control to restore pairing with the TV. The PAIRING button cannot be accessed without
removing the Smart Touch Control's battery cover. Within a distance between 1ft to 13.1ft (30cm to
4m), point the Smart Touch Control to the TV receiver and press the PAIRING button. When pairing is
complete, the pairing image displays at the bottom left of the TV screen.

Battery Low Alarm

If the battery becomes low while using the Smart Touch Control, the following alarm window appears
at the bottom of the left screen. If the alarm window pops up, replace the batteries of the Smart
Touch Control. Use alkaline batteries for longer usage.
<Attempting to connect and completion icons>
<The Smart Touch Control's pairing button>
<Low battery alarm window>
TV
button on the Smart