Installing The System Board, Mic Cable, Ac In Cable - Toshiba Satellite A105-S4547 Maintenance Manual

4 Replacement Procedures
Installing the System Board, MIC cable, AC-IN cable
Install the System Board, MIC cable, AC-IN cable according to the following procedures and
figure 4-32.
NOTE:
Be careful of the eject button for the PC card. It can be damaged when installing the
system board. Make sure it is securing installed.
1. Turn the system board upside down and connect the AC-IN cable to CN503.
2. Turn the system board over and connect the RJ11 cable to CN50 on the system board
3. Seat the system board in the correct position.
4. Secure the system board with one M2x4 black flat-head screw.
5. Seat the MIC in the correct position and connect the MIC cable to CN28 on the system
board.
4-52
4.13 System Board, MIC cable, AC-IN Cable
Satellite A100/A105 / TECRA A7
Maintenance Manual