Sleep Feature; On-Screen Menus - RCA RCU310BB - Universal Remote Control User Manual

RCU310_US_IB_REVB 4/10/03
Sleep Feature (Select Models Only)
This feature will automatically turn off your TV
at a duration you choose from 1 to 99 minutes.
PROGRAMMING SLEEP FEATURE
INDICATOR 1. Press and hold the SLEEP key
SLEEP LIGHT
until the indicator light illuminates.
Release the SLEEP key.
2. Enter time in minutes using the
numerical key pad. The indicator
1 2 3
light should turn off. (Minute 1 thru
4 5 6
9: press 0 before the actual number.
7 8 9 Maximum: 99 minutes).
0
3. Leave remote aimed at television.
(Sleep Feature will not work unless
remote is left aimed at television.)
CANCELING THE SLEEP TIMER
(BLINK)
SLEEP
The Sleep Timer program will be
canceled and reset to zero by either
of the following.
OR
1. Press and hold the SLEEP key
ON•OFF
until the indicator light blinks.
2. Press the ON•OFF key,
turning TV off.
Using On-screen Menus
This remote cannot access every menu system of all models
and brands of consumer electronics components. However,
if you've successfully programmed the VCR•DVD key to
operate a DVD player, you can access DVD disc menus
with the MENU key.
The MENU key will also access TV menu systems for
most RCA, GE and PROSCAN TV's, as well as some other
popular brands. Also, some RCA VCR menus are supported
by this remote's menu key. This remote also supports select
satellite receiver menus.
If this remote's MENU key doesn't access the menu system
for your component, you'll need to use the original remote
to change menu settings.
This remote's MENU key doesn't support cable box
Note:
menu systems and some VCR menu systems.
10
16:44 Page 10