Navigating Through The Setup Utility - Fujitsu LIFEBOOK 990TX2 User Manual

NAVIGATING THROUGH
THE SETUP UTILITY
The BIOS setup utility consists of six menus;
MAIN,ADVANCED, SECURITY, POWER
BOOT and EXIT. The remainder of Section
Three explains each menu in turn including
all submenus and setup items.
The following procedures allow you to navigate
the setup utility menus:
1. To select a menu, use the cursor keys:
2. To select a field within a menu or a sub-
menu,use the cursor keys: ,
3. To select the different values for each field,
press the Spacebar or + to change to the next
higher selection and F5 or - to go to the next
lower selection.
4. To activate a submenu press the Enter key.
C o n f i g u r i n g Y o u r L i f e B o o k 9 0 0 S e r i e s
5. To return to a menu from a submenu, press
the Esc key.
6. To go to the Exit menu from any other
menu, press the Esc key.
P O I N T
Selecting a field causes a help message
about that field to be displayed on the
right-hand side of the screen
, .
P O I N T
.
Pressing the Enter key with the highlight
on a selection that is not a submenu or
auto selection will cause a list of all
options for that item to be displayed.
Pressing the Enter key or Esc key will
select the highlighted choice and
remove the list.
L i f e B o o k 9 0 0 S e r i e s f r o m F u j i t s u
7.Pressing the F9 key resets all items in the
current menu to the default values.
8. Pressing the F10 key saves the current
configuration and exits the BIOS Setup
Utility. You will be asked to verify this
selection before it is executed.
9. Pressing the F1 key gives you a general
help screen.
P O I N T
The BIOS setup screens in this manual
are only representations of the actual
BIOS setup screens. Your BIOS setup
screens may vary.
59