Epson LabelWorks Printable Ribbon Kit User Manual page 34

Document
Table of Contents

Advertisement

Operate the keyboard gently.
Take care not to cut your fingers when cutting a
tape with scissors.
Batteries
Use batteries properly to avoid injury or fire caused
by leaking, overheating, explosion, erosion, or
damage to the product.
Keep batteries out of reach of children. If battery
acid gets into your eyes or on your skin,
immediately rinse the affected area thoroughly
with water and seek medical treatment. If a battery
is swallowed, seek medical treatment immediately.
When replacing batteries, follow these safety
instructions:
If battery acid leaks from a battery, wipe it off
with a cloth and replace the battery with a new
one.
Do not use new and old batteries together or
mix different types of batteries.
Use only AAA alkaline batteries. You cannot use
rechargeable batteries with your product.
Insert batteries so that the polarities (+ and -)
are correct.
32
|
Notices
Remove dead batteries promptly.
Do not heat batteries or throw them in fire or
water.
Do not remove batteries with metal objects
such as tweezers or the tip of a pen.
Make sure to follow local battery disposal
regulations.
AC adapter
Use only model C52CB73020 AC adapter and power
cord with your product. Do not use the AC adapter
with any other equipment and use only with the
specified voltage. Using the wrong AC adapter and
power cord may result in damage, overheating, fire,
or electric shock.
Plug the power cord firmly into the outlet. When
removing the plug from the outlet, grasp the plug
firmly and do not yank on the cord.
Make sure the plug is not dusty when inserting it
into an outlet.
Do not hold the plug with wet hands.
Do not make any modifications to the AC adapter
or power cord.

Advertisement

Table of Contents
loading

Table of Contents