English - Maxtor STM310004SDAB0G-RK - Shared Storage II NAS Server Quick Start Manual

Windows 2000 and Windows XP Installation
Power Button
Step 1. Connect Your Drive
Connect the Ethernet Cable
1. Plug one end of the supplied Ethernet cable
into your network, router or switch.
2. Plug the other end of the Ethernet cable
into the Ethernet port on your Shared
Storage II drive.
Connecting the Power
1. Plug the round female connector from the
power adapter into the drive's power
connector.
Step 2. Power up Your Drive
2. Plug the two-pin female connector on the
power cord into the power adapter.
3. Plug the standard electrical plug from the
power adapter into your power source.
1. Press the round black button on the back
panel of your Maxtor Shared Storage II
drive. The green LED (light) with illuminate
in the center of the power button.
2. Your drive will now start. The start up
process can take up to one minute to
complete.
N N o o t t e e : : Refer to the Maxtor Shared Storage II
User's Guide for more information on the
power/status LED definitions.

ENGLISH

2