Electrical Requirements - GE JNM7196SFSS Installation Instructions Manual

Over the range microwave oven
Hide thumbs Also See for JNM7196SFSS:
Table of Contents

Advertisement

Available languages

Available languages

A qualified electrician must perform a ground continuity
check on the wall receptacle before beginning the
installation to ensure that the outlet box is properly
grounded. If not properly grounded, or if the wall
receptacle does not meet electrical requirements noted
(under ELECTRICAL REQUIREMENTS), a qualified electrician
should be employed to correct any deficiencies.
WARNING:
Can cause injury or death:
PROPERLY GROUNDED
120 V Models
Ensure proper
ground exists
before use
Installation Instructions
WARNING:
Can cause injury or death:
The power cord of this
appliance is equipped with
from this appliance.
qualified electrician.
WARNING:
Can cause injury or death: DO NOT, under any
from the power cord. Do not use with an extension cord.
CAUTION:
CAUTION:
AND a wall.
CAUTION:
120 V Models
This product requires a three-prong grounded outlet.
Product rating is 120 volts AC, 60 Hertz, 15 amps,
and 1.70 kilowatts. This product must be connected
to a supply circuit of the proper voltage and frequency.
Wire size must conform to the requirements of the
National Electrical Code or the prevailing local code
for this kilowatt rating. The power supply cord and
plug should be brought to a separate 15 to 20 ampere
branch circuit single grounded outlet. The outlet box
should be located in the cabinet above the oven and
away from any potential microwave ducting.The outlet
box and supply circuit should be installed by a qualified
electrician and conform to the National Electrical Code or
the prevailing local code.
3
For personal safety, the
For personal safety, this product
BOTH a top

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents