Chapter 2 Model Configuration And Equipment Structure; Model Configuration - Fujitsu C145-C037-01EN Product Description

CHAPTER 2 MODEL CONFIGURATION AND
This chapter gives the model configuration and equipment structure. Printer specifications differ between the 110–
120V version printers and the 220–240 V version printers.
2.1

Model Configuration

PrintPartner 20W page printer
Input power (*)
Options
This printer is shipped with a 250-sheet paper tray (universal paper size).
The resident emulations are the HP LaserJet 5 (PCL6 including PCL5e) and the PostScript level 2.
The standard interfaces are two Centronics parallel (bi-directional) and an RS-232C serial.
* The rated voltage of input power differs with countries of destination and their regulations. See Item no. 28 in
Chapter 3.
EQUIPMENT STRUCTURE
110–120V, 50/60 Hz
220–240 V, 50/60 Hz
250-sheet paper tray (tray 1)
A3, A4, A5, JIS B4, JIS B5, Ledger, Legal, Letter, Executive
250- or 500-sheet paper tray (trays 2 to 4)
A3, A4, A5, JIS B4, JIS B5, Ledger, Legal, Letter, Executive
250- or 500-sheet paper feeder (feed unit + paper tray (trays 2 to 4))
A3, A4, A5, JIS B4, JIS B5, Ledger, Legal, Letter, Executive
Duplex unit (with 250-sheet feed unit)
Duplex unit
Extended interface board
LocalTalk (AppleTalk compatible)
Ethernet C, D, or F (TCP/IP, IPX/SPX, and EtherTalk corresponding)
IrDA (infrared adapter)
Memory card (SIMM)
Memory expansion card (4, 8, 16, 32 MB)
Barcode card (barcode and OCR fonts)
Flash ROM card (4 MB, for PCL5e only)
2-1