Drying Rack (Optional Part) - Samsung DV365ETBGSF/A1 User Manual

DRYING RACK (OPTIONAL PART)

Installing and using the drying rack
1. Open the Dryer door.
2. Position the drying rack in the tumbler, placing the front lip of the drying rack on top of the lint
filter.
3. Place the rear legs in the two recessed areas of the dryer's back wall, and then push down
the middle of the drying rack to fix.
4. Place the items to be dried on the rack, leaving space between them so air can circulate.
5. Close the Dryer door.
6. Use the Time Dry cycle. Select the time according to the moisture and weight of the items.
Start the Dryer. It may be necessary to reset the timer if a longer drying time is needed.
SUGGESTED ITEMS
Washable sweaters
(block to shape and lay flat on rack)
Stuffed toys
(cotton or polyester fiberfilled)
Drying foam rubber, plastic, or rubber on a heat setting may cause damage to the item and
create a fire hazard.
WARNING
Drying Rack is not supplied in this model. The Drying Rack is optional. You can purchase it
through a service center. (Part code : DC61-02773A)
DV365_03064C-03_EN.indd Sec5:27 DV365_03064C-03_EN.indd Sec5:27
SUGGESTED TEMP. SETTINGS
Extra Low
Extra Low
operating Instructions, tips _27
2013-08-08 2013-08-08 4:08:17 4:08:17