Display Bezel - Dell Inspiron XPS Notice

1 M2.5 x 6-mm screws (6)
2 rubber display bumpers (6)
3 M2.5 x 6-mm shoulder screws (2) 7 display base
4 screw covers (2)

Display Bezel

CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.
1. Follow the instructions in "Preparing to Work Inside the
2. Remove the display.
3. Remove the six rubber display bumpers and two screw covers.
4. Remove the six M2.5 x 6-mm screws and two M2.5 x 6-mm shoulder screws and remove the display bezel.
5 display bezel
6 display panel
8 M2.5 x 3-mm screws (8)
Computer."