Dell PowerConnect W-AP134 Installation Manual page 2

2. Attach any necessary cables and/or antennas to the AP.
3. Attach the AP to the secured mounting adapter as shown in
Align the AP with a mounting adapter, placing the AP so that it's mounting tabs are at an angle of
approximately 30 degrees to the adapter.
4. Pushing toward the wall, rotate the AP clockwise until it clicks into place (see
Figure 3
Figure 4
Copyright
© 2011 Aruba Networks, Inc. Aruba Networks trademarks include
Edge Company logo, and Aruba Mobility Management System
All rights reserved. Specifications in this manual are subject to change without notice.
Originated in the USA. All other trademarks are the property of their respective owners.
Open Source Code
Certain Aruba products include Open Source software code developed by third parties, including software code subject to the GNU General Public License (GPL), GNU
Lesser General Public License (LGPL), or other Open Source Licenses. The Open Source code used can be found at this site:
http://www.arubanetworks.com/open_source
Legal Notice
The use of Aruba Networks, Inc. switching platforms and software, by all individuals or corporations, to terminate other vendors' VPN client devices constitutes complete
acceptance of liability by that individual or corporation for this action and indemnifies, in full, Aruba Networks, Inc. from any and all legal actions that might be taken against it
with respect to infringement of copyright on behalf of those vendors.
2
Attaching the AP to the Mounting Bracket
Completed Installation
®
. Dell™, the DELL™ logo, and PowerConnect™ are trademarks of Dell Inc.
Figure 3.
®
, Aruba Networks , Aruba Wireless Networks
Dell PowerConnect W-AP130 Series Wall Mount Kit | Installation Guide
Figure 4).
®
, the registered Aruba the Mobile