Advertisement
3. Connect the ethernet cable to the ethernet port (ENET) on the back of the AP.
4. Secure the AP to the mounting bracket by aligning the mounting holes on the back the AP with the
mounting post on the bracket.
5. Push the AP against the posts and downward until the posts engage the slots at the top of the mounting
holes. See
Figure 7 Completing the Installation (Wall Mount Bracket)
Figure 8 Completing the Installation (Box Mount Bracket)
Figure 9 Completed Installation
4
Figure 7
and
Figure 8
for more details.
AP in Box Mount Bracket
AP in Wall Mount Bracket
AP-105 Mounting Kit
| Installation Guide
Advertisement
