Dell PowerConnect W-Airwave Quick Start Manual page 3

To continue with the installation of AirWave software, enter this command at the prompt:
./amp-install
The installation of AirWave software will proceed through eight steps. Steps 3-5 require no user input.
Step 1: Configuring date and time

Step 2: Check for prior installations.

Step 3: Installing AMP Software. No user input.

Step 4: Checking the AirWave Installation. No user input.

Step 5: Enter a static IP configuration for the primary network interface.

Step 6: Enter a display name for the AirWave system

Step 7: Generate AMP's SSL Certification. Specify whether AMP has a valid DNS name on the network.

Step 8: Enter a new root user password. This password should be and recorded in a safe place.

Accessing the AirWave Web Interface
Enter the IP address assigned to the AirWave server into the URL box of your web browser. Use these default
credentials to log in to the system:
Username:

Password:

The first page to appear after you log in is the Home > License page. Paste the AirWave license key you received
into the license field on this page, then click Save to display the Dell PowerConnect W-AirWave licensing
agreement.
Click I Accept to agree to the terms of the license agreement and apply the license key.
Changing Login Credentials
Dell strongly recommends that you change the system default credentials
The password for the default web interface user may be changed using the web interface itself, from the AMP

Setup > Users page. Click the pencil icon to edit the admin user.
The password for the root user may be changed by entering the command

line prompt.
Dell PowerConnect W-AirWave 7.5 | Quick Start Guide
admin
admin
on the server command
passwd
3