Dell PowerConnect W-Airwave Quick Start Manual page 3

#################################################################
Welcome to Dell PowerConnect W-AirWave.
Please run "./amp-install" to complete the installation.
#################################################################
To continue with the installation of Dell PowerConnect W-AirWave software, enter this command at the
prompt:
./amp-install
The installation of AirWave software will proceed through seven steps. Steps 2-4 require no user input.
Step 1: Configuring date and time

Step 5: Enter static IP configuration for the primary network interface

Step 6: Enter a display name for the Dell PowerConnect W-AirWave system

Step 7: If a DNS entry exists for the IP address assigned to the AirWave server, enter 'y' then the DNS

hostname; otherwise enter 'n'
Step 8: Enter a new root user password. This password should be and recorded in a safe place.

Accessing the AirWave Web Interface
Enter the IP address assigned to the AirWave server into the URL box of your web browser. Use these default
credentials to log in to the system:
username: admin

password: admin

The first page to appear after you log in is the Home > License page. Paste the Dell PowerConnect W-AirWave
license key you received into the license field on this page, then click Save to display the Dell PowerConnect W-
AirWave licensing agreement.
Click I Accept to agree to the terms of the license agreement and apply the license key.
Changing Login Credentials
Dell strongly recommends that you change the system default credentials
The password for the default web interface user may be changed using the web interface itself, from the AMP

Setup > Users page. Click on the pencil icon to edit the admin user.
The password for the root user may be changed by entering the command passwd on the server command line

prompt.
Dell PowerConnect W-AirWave 7.4 | Quick Start Guide 3