Electrical Connections - Bush LT24M3 Instruction Manual

ELECTRICAL CONNECTIONS

CONNECTING TO POWER
Check that the voltage marked on the product corresponds with your supply voltage. This product is fitted with a
13A plug complying with BS1363. If this plug is unsuitable or needs to be replaced, please note the following:
PLUG REPLACEMENT
If you need to replace the fitted plug:
WARNING
As the colours of the wires in the mains lead of this apparatus may not correspond
with the coloured markings identifying the terminals in your plug, proceed
as follows:
The wire which is coloured blue must be connected to the terminal, which is marked with N or coloured blue. The
wire which is coloured brown must be connected to the terminal which is marked L or coloured brown. The green
and yellow wire must be connecting to the terminal marked with the letter E or the earth symbol . Always ensure
that the plug cord grip is fastened correctly.
If a 13A (BS1363) fused plug is used it must be fitted with a 3A fuse conforming to BS1362 and be ASTA approved. If
in doubt contact a qualified electrician.
BUSH|Full HD 1080p LCD TV | User Manual | Helpline:0845 604 0105
Never connect live or neutral wires to the earth terminal of the
plug. Only fit an approved 13 Amp BS1363/A plug and the correct
rated fuse. If in doubt, consult a qualified electrician.
WASTE ELECTRICAL PRODUCTS SHOULD NOT BE DISPOSED OF WITH
HOUSEHOLD WASTE. PLEASE RECYCLE WHERE FACILITIES EXIST. CHECK
WITH YOUR LOCAL AUTHORITY FOR RECYCLING ADVICE.
P.04