Important Safety Instructions; Read Before Operating Equipment - Haier L42S9 Owner's Manual

Read these instructions.
1.
Keep these instructions.
2.
Heed all warnings.
3.
Follow all instructions.
4.
Do not use this apparatus near water.
5.
Clean only with a dry cloth.
6.
Do not block any of the ventilation openings.
7.
Install in accordance with the manufacturers instructions.
Do not Install near any heat sources such as radiators,
8.
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or
9.
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and third grounding prong. The wide blade or third
prong are provided for your safety. When the provided
plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched
10.
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
Only use attachments/accessories specified by the
11.
manufacturer.
Use only with a cart, stand, tripod, bracket, or
12
table specified by the manufacturer, or sold with
the apparatus. When a cart is used. Use caution when
moving the cart/apparatus combination to avoid injury
from tip-over.
Unplug this apparatus during lightning storms or when
13.
unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing
14.
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into apparatus, the
apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
Damage Requiring Service - The appliance should be
15.
serviced by qualified service personnel when:
A. The power supply cord or the plug has been damaged;
B. Objects have fallen, or liquid has been spilled into the
appliance;
C. The appliance has been exposed to rain
D. The appliance does not appear to operate normally or
exhibits a marked change in performance;
E. The appliance has been dropped, or the enclosure
damaged.

IMPORTANT SAFETY INSTRUCTIONS

Read before operating equipment

2
Tilt/Stability - All televisions must comply with
16.
recommended international global safety standards for
tilt and stability properties of its cabinet design.
applying excessive pull force to the front, or top, of
the cabinet which could ultimately overturn the
product.
placing electronic equipment/toys on the top of the
cabinet. Such items could unsuspectingly fall from
the top of the set and cause product damage and/or
personal injury.
Wall or Ceiling Mounting - The appliance should be
17.
mounted to a wall or ceiling only as recommended by
the manufacturer.
Power Lines - An outdoor antenna should be located
18.
away from power lines.
Outdoor Antenna Grounding - If an outside anten-
19.
na is connected to the receiver, be sure the antenna
system is grounded so as to provide some protection
against voltage surges and built up static charges.
Object and Liquid Entry - Care should be taken so
20.
that objects do not fall and liquids are not spilled into
the enclosure through openings.
Battery Usage CAUTION - To prevent battery
21.
leakage that may result in bodily injury, property dam-
age, or damage to the unit:
marked on the unit.
alkaline, etc.).
long time.
For ventilation, leave at least 4" to 6" free all around
22.
the TV. Do not place the TV on a carpet.
The equipment shall not be exposed to dripping or
23.
splashing.
The equipment shall not be exposed to rain or mois-
24.
ture and objects filled with liquids, such as vases, shall
be placed on the apparatus.
The apparatus must be connected to a mains socket
25.
outlet with a protected earthed connection.
The appliance coupler is used as the disconnect device
26.
of this apparatus, the disconnect device shall remain
readily operable.