Bush L319LED User Manual page 15

Use a supplied antenna cable to connect the TV signal to the LED LCD TV's TV CABLE
terminal.
Connect the DC plug of the AC-DC adapter to the DC 12V port at the rear of the
TV. Connect the power cord to the AC-DC adapter and wall outlet.
Press the button on the remote to turn on the LED LCD TV.
Always disconnect the LED LCD TV from the power outlet when the LED
LCD TV will not be used for a long period of time.
The POWER button on the front panel is only used for switching the LED
LCD TV into standby, it does not disconnect the device from the main
voltage. To completely disconnect the main voltage, please remove the
power plug from the socket.
14
VHF/UHF IN
BUSH HD Ready LED LCD TV User Manual Helpline: 0845 604 0105