Exit Menu - Leaving The Setup Utility - Fujitsu LifeBook V1010 Bios Manual

EXIT MENU – LEAVING THE SETUP UTILITY
The Exit Menu is used to leave the setup utility. Follow
the instructions for Navigating Through the Setup
Utility to make any changes. (See Navigating through the
Setup Utility on page 2 for more information.)
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Discard Changes
Save Changes
Save Changes and Power Off
F1 Help
ESC Exit
Table 18: Fields, Options and Defaults for the Exit Menu
Menu Field Description
Exit Saving Exit Saving Changes will store the entries on all setup utility menus to the BIOS memory and then
Changes exit the setup utility. A confirmation message Save Configuration changes and exit now? [Yes] [No]
will be displayed.
Exit Discarding Selecting Exit Discarding Changes will exit the setup utility with out writing to the BIOS memory.
Changes When the BIOS recognizes this selection it will load the operating system and begin operation.
Load Setup Selecting Load Setup Defaults will load the factory preset default values for all menu fields, then dis-
Defaults play the message Load default configuration now? [Yes] [No]. When confirmed the setup utility will
return to the Exit Menu. To return to another menu follow the directions in the Navigating Through
the Setup Utility Section.
PhoenixBIOS Setup Utility
Main Advanced Security
Select Item -/Space
Select Menu Enter
The following table shows the names of the menu fields
for the Exit menu, the default settings and a description
of the field's function and any special information
needed to help understand the field's use.
Power Savings
Change Values
Select Sub-Menu
Figure 18. Exit Menu
E x i t M e n u
Boot Exit
Item Specific Help
Exit System Setup and
save your changes to
CMOS.
F9 Setup Defaults
F10 Save and Exit
27