Device Overview; External Antenna Connectors - Dell PowerConnect B-RX4 Installation Manual

Device Overview

Figure 1
LEDs
The W-AP130 Series access point is equipped with five LEDs that indicate the status of various components of
the device.
PWR—Indicates the whether or not the W-AP130 Series is powered on and its status.

ENET 0—Indicates the status and activity of Ethernet port 0

ENET 1—Indicates the status and activity of Ethernet port 1

11b/g/n—Indicates the status of the 2.4 GHz radio

11a/n—Indicates the status of the 5.0 GHz radio

For more information about the LEDs and their behavior, see

External Antenna Connectors

The W-AP134 is designed for use with external antennas. The W-AP135 is equipped with internal antennas. For
more information about antenna types and configurations, visit dell.com.
2
W-AP130 Series Access Points (W-AP134 Shown)
Antenna Connectors (W-AP134 Only)
LED Status Indicators
Table 3 on page
Dell PowerConnect W-IAP130 Series Instant Access Point | Installation Guide
8.