Shooting Stitch Assist Images - Canon PowerShot ELPH 115 IS User Manual

ç Contents
•
On-screen image brightness in step 3, when you pressed
the shutter button halfway, may not match the brightness
of your shots.
• With shutter speeds of 1.3 seconds or slower, there will
be a delay before you can shoot again, as the camera
processes images to reduce noise.
• Set [IS Mode] to [Off] when using a tripod or other means
to hold the camera still
•
If the flash fires, your shot may be overexposed. In this case, set
the flash to [!] and shoot again.

Shooting Stitch Assist Images

Shoot a large subject by taking multiple shots at various positions,
and then use the software
panorama.
ç Chapter Contents
(= 146).
(= 35) to combine them into a
1
Choose [x] or [v].
z z Follow steps 1 – 2 in "Specific
Scenes"
[x] or [v].
2
Take the first shot.
X X The first shot will determine the
exposure and white balance.
Still Images
(= 98) and choose
117