Canon PowerShot ELPH 115 IS User Manual page 115

ç Contents
•
Even if your face is not detected after you join the others in the
shooting area, the camera will shoot about 15 seconds later.
• To change the number of shots, press the <o><p> buttons after
choosing [ ] in step 1. [Blink Detection]
for the final shot.
ç Chapter Contents
3
Press the shutter button
all the way down.
X X The camera now enters
shooting standby mode, and
[Look straight at camera to start
count down] is displayed.
X X The lamp blinks and the self-
timer sound is played.
4
Join the subjects in the
shooting area and look
at the camera.
X X After the camera detects a
new face, the lamp blinking
and self-timer sound will speed
up. (When the flash fires, the
lamp will remain lit.) About two
seconds later, the camera will
shoot.
z z To cancel shooting after you
have triggered the self-timer,
press the <n> button.
(= 91) is only available
115