Table of Contents
Advertisement
L i f e B o o k B S e r i e s N o t e b o o k B I O S
Drive0 Submenu of the Main Menu
The Drive0 submenu identifies what serial ATA/IDE
devices are installed.
Main
Type:
Total Sectors::
Maximum Capacity:
Multi-Sector Transfers:
LBA Mode Control:
Transfer Mode:
Ultra DMA Mode:
F1
Help
ESC
Exit
Table 2: Fields, Options and Defaults for the Drive0 Submenu of the Main Menu
Menu Field
Options
Type:
• Auto
• None
LBA Format
Total Sectors:
___
Maximum
___
Capacity:
Multi-Sector
___
Transfers:
LBA Mode
___
Control:
6
PhoenixBIOS Setup Utility
Advanced
Security
Power
Drive0 [TOSHIBA MK6025GAS]
[Auto]
LBA Format
117210240
60012MB
[16 Sectors]
[Enabled]
[Multiword DMA 2]
[Disabled]
Select Item
-/Space
Select Menu
Enter
Figure 2. Drive0 Submenu
Default
Description
[Auto]
Selects the ATA/IDE device type. Select Auto to have the type automatically
identified by the BIOS at POST. If None is selected, none of the following
Set-up items appear. To toggle between Auto and None press the spacebar.
Logical Block Addressing (LBA)
___
The total number of sectors on your hard disk
___
The maximum capacity of your hard disk
[16 Sectors]
This option cannot be changed when Auto is selected; it is automatically
selected.
[Enabled]
Enables or disables logical Block Addressing in place of Cylinder, Head, Sec-
tor addressing. This option cannot be changed when Auto is selected; it is
automatically selected.
Note: Actual hard drive label shown may vary. Depending
on the drive type, information such as cylinders, heads and
sectors may or may not be displayed.
Boot
Info
Exit
Item Specific Help
Select Serial ATA/IDE
drive installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
Change Values
F9
Select
Sub-Menu
F10
Setup Defaults
Save and Exit
Advertisement
Table of Contents
