Table of Contents
Advertisement
Boot Device Priority Submenu of the Boot Menu
The Boot Device Priority submenu is for setting the order of checking of sources for the operating system.
•
Be aware of the operating environment when booting from a CD or you may overwrite files by mistake.
•
A bootable CD-ROM has either a floppy disk or a hard drive format. When a bootable CD-ROM is
used, drive allocations change automatically without changing the BIOS setup. If floppy disk format is
used, the CD-ROM becomes Drive A. The CD-ROM will only take drive C: (hard drive format) if the
internal hard drive is not present or is disabled. A bootable CD-ROM cannot use a C: designation if a
formatted internal hard drive is present since the C: designator is always reserved for the internal hard
drive.The boot sequence ignores new drive designations, but your application software will use the new
designations.
•
In order for a portable USB memory device (e.g., JumpDrive or memory stick) to be recognized in the
Boot Device Priority list, it must have been installed before booting the system.
•
Note that some older portable USB memory devices may not be recognized as bootable devices.
•
The Boot Menu can also be invoked outside of the Setup Utility using the TrustedCore menu or the [F12]
key. See Using the TrustedCore Menu for more information.
Main
Advanced
Boot priority order:
1:
Floppy Disk Drive
2:
Drive0: FUJITSU MHV2040BH
3:
Drive1: None
4:
CD/DVD Drive
5:
NETWORK: B02 D00 Yukon PXE
6:
7:
8:
Excluded from boot order:
:
USB MEMORY: None
:
USB HDD: None
F1
Help
ESC
Exit
PhoenixBIOS Setup Utility
Security
Power Savings
Boot Device Priority
Select Item
-/Space
Change Values
Enter
Select
Select Menu
Figure 16. Boot Device Priority Submenu
B o o t M e n u
Boot
Item Specific Help
Keys used to view or
configure devices:
<+>/<Space> or <->
moves the device up or
down.
<x> exclude or include
the device to boot.
F9
Setup Defaults
Sub-Menu
F10
Save and Exit
25
Advertisement
Table of Contents
