Tv Function - Polaroid FDM-0715 - 7 User Manual

TV Function

Basic Operation
Connect the antenna to the antenna jack on the rear panel. After connecting the
antenna, connect the power supply cord. If the player is in standby mode, press the
POWER button on the front panel to turn on the power.
Press the TV button on the remote control to shift to TV mode.
Press the ▼, ▲ buttons on the remote control to select the desired channel. To go to
a channel directly, first press the number buttons on the remote control for input and
then press the ENT button for confirmation. You may also wait for a moment without
pressing the ENT button and the unit will go to the selected channel.
Some preferences can be preset:
Picture Parameter Setup
Press the SETUP/SET button once on the remote control to enter PICTURE setup
menu, and screen display as shown:
Use the ▼, ▲ buttons to select the item you want to set (Brightness, Contrast,
Color).
Use the ►, ◄ buttons to adjust, you can adjust the items between 0 and 20.
Use the ▼, ▲ buttons to select the Language, press the ►, ◄ buttons to select
English, French or Spanish.
To restore a setting to the original value, use the ▼, ▲ buttons to select Reset, then
press the ENT button to confirm the change. To exit the setup menu, first use the ▼,
▲buttons to highlight PICTURE, then press the ◄ button on the remote control.
Press the ► button on the remote control to enter TV Setup menu.
TV System Setup
When the ► button is pressed, the TV system setup menu will appear:
PICTURE
BRIGHTNESS 10
CONTRAST 10
COLOR 10
LANGUAGE ENGLISH
RESET
◄ EXIT TV SETUP ►
- 20 -