Important Safety Instruction Product Features ------------------------------------------------------------------ Accessory List ----------------------------------------------------------------- Disc Information ------------------------------------------------------------------- Front Panel--------------------------------------------------------------------------- Rear Panel---------------------------------------------------------------------------- Remote Control -------------------------------------------------------------------------------- Special Features of the DVD Disc Tray------------------------------------ System Connections Connecting to External AV Signal Source (AV1) Connecting to External AV Signal Source (AV2) Connecting to External AV Signal Source (Video3 /Video4) Connecting to HDMI Output Device Connecting to External AV Device (AV OUT)
Important Safety Instructions The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric to persons.
Important Safety Instructions Note: 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Maintain well ventilated conditions around the product. Do not put product on bed, sofa or anything that blocks ventilation.
Product Features This product is designed with a moveable DVD Disc Tray. The Disc Tray can be installed in three different positions. The moveable Disc Tray offers you the flexibility to choose which direction to insert your DVD in order to maximize your space. The unit incorporates high-resolution LCD display, DVD player and TV receiver in one system.
Accessory List ITEM Remote Control (with batteries) Power Supply Cord Composite Audio/Video Cable User’s Manual NOTE Accessories and their parts numbers are subject to modification without prior notice due to improvements. The accessory images are supplied for reference only. NAME - 5 -...
Disc Information Discs Formats Supported By This Player DISC LOGO JPEG The operating method of some DVD discs is specified by the software maker. Please refer to the instruction manual of the disc. The DVD Player will play most recordable (CD-R) or erasable (CD-RW) CDs, but playback of CD-R or CD-RW discs created on a computer requires proper formatting and finalization of the disc for audio playback.
Front Panel Front and Right View 1. 26" Color TFT screen 26" color TFT screen offers a crystal clear image. 2. INPUT button Press to enter the Input menu and then use the (Composite 1), AV2 (Composite 2), AV3 (Component 1), AV4 (Component), VGA, HDMI, DVD, then press the Enter button to enter the selected mode.
Page 9
Front Panel(Continued) STOP button Press to stop playback in DVD mode. 7. PLAY button Press to start playback in DVD mode. 8. EJECT button Press to eject the disc out from the disc tray. 9. POWER button Press to enter or exit the standby mode. 10.
Rear Panel Rear View Open the back cover on the right side of the unit’s rear panel, all the jacks will appear, as shown on the figure below: 1. Y/Pr(Cr)/Pb(Cb) and L/R audio Input Jacks Connectors for the Y/Pr(Cr)/Pb(Cb) input in AV3 (Component) mode.
Remote Control Preparation of Remote Control Push the back cover to open the battery compartment. Insert two batteries (1.5V, size AAA), please make sure the polarity matches the marks inside the compartment. Press the back cover to close it. Under normal use the battery will last for six months.
Remote Control Remote Control Button Functions For TV Operation 1. POWER button Press to enter or exit the standby mode. 2. 0~9 Number buttons Press to select numbers. 3. MTS button In TV mode, press to shift among SAP, Mono or Stereo mode. 4.
Page 13
Remote Control (Continued) Remote Control Button Functions For DVD Operation Play button Press to play the disc in DVD mode. Pause button In DVD mode, press to pause the playback or start step frame by frame playback. Press the PLAY button to resume normal playback.
Special Features of the DVD Disc Tray CAUTION: Before removing or installing the DVD disc tray, unplug the power supply cord. This unit is designed with a movable DVD Disc Tray. The Disc Tray can be installed in three different positions giving you the ability to maximize space and convenience.
System Connections • Do not connect the power cord until all other connections have been made. • Ensure that you observe the color cables when connecting audio and video cables. • Before connecting, open the cover on the right side of the unit’s rear panel. Connecting To External AV Signal Source (AV1) Use the audio and video cable to connect the input jacks on the right side of the unit’s rear panel to the external AV signal source.
System Connections Connecting To External AV Signal Source (AV2) Use the audio and video cable to connect the input jacks on the right side of the unit’s rear panel to the external AV signal source. Use the S-Video cable to connect the S-Video input jacks on the right side of the unit’s rear panel to the external AV signal source.
System Connections Connecting to External AV Signal Source (AV3/ AV4) Use the audio and video cables to connect the Y/Pb (C b) /Pr (Cr) input Jacks on the right side of the unit’s rear panel to the external AV signal source. After connection, turn on the power of the unit and the external AV signal source, press the Input button to enter the Input menu, then select AV3 (Component) or AV4 (Component) and press the Enter button to confirm the selected mode.
System Connections Connecting to HDMI Output Device This unit can be connected to the AV device with HDMI output. See the below figure for details: After connection, turn on the power of the unit and the external HDMI output device, press the Input button to enter the Input menu, then select HDMI and press the Enter button to confirm the HDMI mode.
System Connections Connecting to External AV Device (AV Out) Use the audio/video cables to connect the audio and video output Jacks on the right side of the rear panel to the external AV device. Special Notes: The features of this A/V equipment allows you to connect to other A/V equipment. Care should be taken when connecting the A/V outputs of this device to the A/V inputs of the other device.
System Connections Connecting to Digital Amplifier The unit is designed with an optical digital audio jack, can be connected to the digital amplifier, see the below figure: - 19 -...
System Connections Connecting to PC The unit can be connected to PC (personal computer) via the VGA cable. Follow the figure below to connect: 1. Connect one end of the VGA cable to the VGA input jack on the right side of the unit’s rear panel. 2.
System Connections(Continued) Connecting to TV Signal Input This unit can be connected to the TV signal input source via the 75Ω antenna jack on the rear panel. After connection, turn on the power of the unit, press the Input button and select TV mode. Connecting to Power Supply One end is connected to the jack on the rear panel of the unit, the other end to the AC110~220V wall outlet.
System Connections(Continued) Connecting to Earphone This unit can be connected to an earphone for listening music privately. See the below figure for details: CAUTION: Turn down the volume before connecting the earphone. - 22 -...
Input Source Selecting The player incorporates multiple video modes, you can select the video mode according to the input signal. Press the Input button to enter the Input menu, the screen will display as below: In the menu, press the direction button to select the video mode, press the Enter button to enter the selected mode.
System Setup and Operation Preparations 1. After completing your AV and power connections, press the POWER button to turn on the unit. 2. Press the Input button to display the Input menu, then press the ▲▼ button to select TV and press the Enter button to enter TV mode.
System Setup and Operation(Continued) Manual Ch Search Press the ▲▼ button to select the Manual Ch Search, press the Enter button to enter the Manual Channel Set Menu, see the right figure: In the menu, press the buttons to select items, press the Enter button to confirm or set, press the Exit button to exit.
Page 27
System Setup and Operation(Continued) Brightness Press the ▲▼ button to select the Brightness, press the Enter button to enter the adjusting mode, press the ◄ ► button to adjust the value. Press the Enter button again to confirm and return. Sharpness Press the ▲▼...
System Setup and Operation(Continued) Audio Setting Press the Menu button to enter the main setup menu, as shown on the right: In the menu, press the ▲▼ button to select the Audio, and then press the ◄ or ► button to enter the setup menu, press the ▲▼...
System Setup and Operation(Continued) Feature Setting Press the Menu button to enter the main setup menu, as shown on the right: In the menu, press the ▲▼ button to select the Feature, and then press the ◄ or ► button to enter the setup menu, press the ▲▼...
Page 30
System Setup and Operation(Continued) Advanced Video Menu Press the ▲▼ button to select the Advanced Video Menu, press the Enter button, the screen is shown as right figure: In the menu, press the direction buttons to select items, press the Enter button to set, press the Exit button to exit.
Page 31
System Setup and Operation(Continued) In the menu, select Parental Lock and press the as the below figure: Fantasy violence [FV], adult languages [L], sexual situations [S], violent scenes [V] and suggestive dialogues [D] In the menu, press the to set or cancel the rating. Press the Exit button to exit the setup menu. Closed Caption Options Press the ▲▼...
DVD Player Operation Disc Loading Steps: 1. Press the POWER button to turn on the LCD TV. Press the Input button and select DVD mode, press the Enter button confirm and select DVD mode. 2. Handing the disc with its printed side facing the front of the unit, insert vertically into the disc tray. (Referring to the below picture.) 3.
Page 33
DVD Player Operation(Continued) Pause Press the Pause button once to pause the playback, press it repeatedly to start step-by-step playback, press the Play button to resume normal playback. Previous and Next Press the button to go to the next chapter. Press the the current chapter, press it twice to go to the previous chapter.
Page 34
DVD Player Operation(Continued) CD Playback The player will play all tracks on a CD disc by default. You can use the buttons, or number buttons to select a track. Stop ■ Press the ■ Stop button once to stop playback and then press button twice to stop playback completely.
DVD Player Operation(Continued) JPEG Playback JPEG is a common picture format that requires small amounts of storage per image and has low loss in resolution. Hundreds of pictures can be stored on a disc in this format. In order to view JPEG photo albums, you can ask your film development company to make a ”PICTURE CD”...
USB and SD/MMC/MS Card Function USB and SD/MMC/MS Card Function Preparation: 1. Install the DVD module onto the LCD TV. 2. Connect the unit to the power supply. 3. Press the POWER to turn on the unit. 4. Press the Input button and select DVD, press the Enter button to select DVD mode. 5.
DVD System Setup Preparations 1. Install the DVD module onto the LCD TV. 2. Connect to the power supply and turn on the unit. 3. Press the Input button and select DVD, press the Enter button to select DVD mode. 4.
Page 38
DVD System Setup(Continued) OSD Lang Screen Saver Last Memory Media Center The item is used to select the OSD language. 1. Press the direction buttons to select OSD Lang. 2. Press the Enter button to enter the setup. 3. Use the direction buttons to select items.
Page 39
DVD System Setup(Continued) Audio Setup Page Press the Setup button to enter the General setup menu, then use the Audio Setup Page, the screen will display as the following: Dolby Digital Setup Dual Mono Dynamic direction buttons to select In the menu, Use the direction buttons to select the desired item.
DVD System Setup(Continued) Hdcd Setup In the Audio Setup Page, use the button to enter the setup, the screen will display as below: Video Setup Press the Setup button to enter the General setup menu, then use the Video Setup Page, the screen will display as the following: HD Mode Use the direction buttons to select HD Mode, press the Enter button to enter the menu as...
Page 41
DVD System Setup (Continued) Video Quality Setup Select Quality, press the Enter button to enter the menu as below: Sharpness Brightness Contrast 1. In the menu, Use the select the desired item. 2. Press the Enter button to enter the item. 3.
DVD System Setup(Continued) Preference Setup Press the Setup button to enter the General setup menu, then use the Preference Page, the screen will display as the following: Audio Subtitle Disc Menu direction buttons to select In the menu, Use the direction buttons to select the desired item.
Page 43
DVD System Setup(Continued) Default 3. Press the direction buttons to select Default. 4. Press the Enter button to select Reset. 5. Press the Enter button, all the settings will return to the default status. - 42 -...
Troubleshooting SYMPTOM The player does not play. There is no sound. LCD does not display an image or is blank. DVD does not continue to play or plays the same section repeatedly. There is no picture or picture moves up and down. The remote control does not work.