Samsung NP-Q1U - Q1U XP - A110 800 MHz Getting Started Manual page 142

2
Click Run Enrollment Wizard to start
the registration.
3
For the integrated password
authentication step, complete the
following.
Enter the Windows user ID and logon
password and click the Next button.
If you do not enter a logon password,
the integrated password authentication
function will be permitted to anyone; it
is therefore recommended entering a
logon password.
Creating a user logon password.
z Select Start > Control Panel
> User Accounts > Create
password for user account.
x Enter a password in the New
Password field, and re-enter the
password in the Confirm New
Password field. Click Create
Password. A password has been
created.
4
To register a fingerprint, click on
AuthenTec Fingerprint Device and
then click the Next button.
5
The fingerprint registration begins.
Select the finger to be registered and
click the Next button.
6
Register the fingerprint by placing your
finger over the fingerprint identification
sensor and placing it down slowly.
Repeat this at least 3 times until the
next screen appears automatically.
7
Place the registered finger over the
fingerprint identification sensor again
and click the Next button.
8
A window appears asking if you want
to register an additional fingerprint.
Click No to proceed to the next
window.
If you click Yes, Steps 4~7 are
repeated.
9
Proceed with the settings and click the
Next button.
142