Complete The Appassure Core Setup Wizard - Dell PowerVault DL4000 Deployment Manual

NOTE: It is recommended that you expand the current repository. Separate repositories do not utilize capacity
as efficiently, and deduplication cannot occur across separate repositories.
3. Under Standby Virtual Machine Allocation, use the slider to allocate storage for standby virtual machines.
As you move the slider to the right, the Standby VM size increases and the Repository size decreases.
4. Click Apply.
The disk provisioning begins and the status of the AppAssure repository creation is displayed in the Status area.
5. After disk provisioning is complete, click Next.
The Disk Provisioning page displays the size of the standby storage capacity and drive letter for the VM and the
capacity of the AppAssure repository and its name.
NOTE: If an external enclosure is attached to the appliance, you must repeat step 5.
6. Click Next.
The configuration is completed.
7. Click Exit.
The AppAssure 5 Core console is displayed on your default web browser.
A message prompts you to enter your Windows Microsoft administrator username and password.
8. Enter your Windows Microsoft administrator username and password and click OK.
The AppAssure 5 Core Setup Wizard is displayed.

Complete The AppAssure Core Setup Wizard

1. In the AppAssure Core Setup Wizard, on the Welcome screen, you can change the Display Name.
This is the name that is displayed for the DL4000 in the AppAssure Core console.
2. Click the forward arrow button in the top right corner to advance to the Email Notifications screen.
3. If you want to receive e-mail notifications about events, select Enable email notifications and complete the required
information to configure the message settings.
NOTE: This section only configures the message formats and delivery. To select the types of events that
generate notifications, select the Configure tab in the AppAssure Core console.
4. Click the forward arrow.
The AppAssure Core can encrypt agent snapshot data within the repository. Instead of encrypting the entire
repository, AppAssure allows you to specify an encryption key during the protection of an agent in a repository
which allows the keys to be re-used for different agents.
The Create Encryption Key page is displayed.
5. Complete the following information:
Field
Name
Comment
Passphrase
Confirm Passphrase
After entering the encryption key information, click the check icon in the upper right corner to complete the
AppAssure Core setup.
12
Description
Enter a name for the encryption key.
Enter a comment for the encryption key. It is used to provide additional details for the
encryption key.
Enter a passphrase. It is used to control access.
Re-enter the passphrase. It is used to confirm the passphrase entry.