Dell PowerVault 110T LTO 3 Handbook page 20

Table 10. Resetting Your PowerVault 110T LTO Tape Drive
Drive Type
Dell PowerVault
110T LTO3-060
(Tandberg)
Dell PowerVault
110T LTO3-080
(IBM)
Dell PowerVault
110T LTO4-120
Dell PowerVault
110T LTO4-
120HH
Dell PowerVault
110T LTO5-140
NOTE:
It may take up to 20 minutes for a tape cartridge to fully rewind and eject.
20 LTO Media Handbook
Device Reset Procedure
Press and hold the Eject button for six seconds. The drive enters
1
service mode and all the LEDs flash slowly.
Press Eject twice. The Activity LED flashes fast.
2
Double-click the Eject button.
3
Press and hold the Eject button for more than 10 seconds.
1
Release the Eject button.
2
Press Eject again to eject tape.
3
Press and hold the Eject button for more than 10 seconds.
1
Release the Eject button.
2
Press Eject again to eject tape.
3
Press and hold the Eject button for more than 10 seconds.
1
Release the Eject button.
2
Press Eject again to eject tape.
3
Press and hold the Eject button for more than 10 seconds.
1
Release the Eject button.
2
Press Eject again to eject tape.
3
(continued)