Asus RS700-X7 RS8 User Manual page 45

1. Select a 1U space on the rack
where you want to install the rack
rail. A 1U space consists of three
square mounting holes with two
thin lips on the top and the bottom,
as shown in the right figure.
2. Adjust the rack rail to fit the depth
of the rack.
3. From inside the rack, place the
rear rail hook on the bottom thin
lip of the rear mounting hole, and
then place the front rail hook on the
bottom thin lip of the front mounting
hole, as shown in the right figure.
4. Secure the front and rear ends of
the rail with two rack screws and
washers.
5. Repeat step 1 to 4 to attach the
rack rail on the other side of the
rack.
ASUS RS720-X7/RS8 3-3