Table of Contents
Advertisement
1.3
Card layout
The illustration below shows the major components of the RAID card.
2
2
1.
ASUS PIKE interface-1: PCI-E x8
2.
ASUS PIKE interface-2: 8-port SAS signal with SGPIO interface*
3.
SAS RAID card status LED (lights up and blinks to indicate that the card is working
normally)
* The SGPIO interface is used for visibility into drive activity, failure and rebuild status,
so that users could build high-performatnce and reliable storage systems. Refer to the
motherboard manual for detailed information about using the SGPIO connectors on the
motherboard.
1.4
System requirements
Before you install the PIKE 2308 SAS RAID card, check if the system meets the following
requirements:
•
Workstation or server motherboard with a PIKE RAID card slot
•
SAS or SATA hard disk drives
•
Supporting operating system:
Windows
and Linux operating systems (refer to website for details)
®
•
Other requirement:
- Appropriate thermal solution
- Certified power supply module
ASUS PIKE 2308
1
1
3
1-3
Advertisement
Table of Contents
