Motherboard Securing - Asus AP2000 Hardware Reference Manual

II. System Components

Motherboard Securing

Remove the extended expansion card guide before installing or removing
the motherboard. All screws are necessary to provide the needed stabiliza-
tion to support all the motherboard expansion cards used in a server.
Installed P2B-DS motherboard
Chassis Intrusion Switch
The chassis provides an micro toggle
switch that must be connected to the
motherboard for the intrusion detec-
tion to work. The motherboard will
signal the ASMA software when the
side panel is opened. The connection
diagram is given here.
28
Place nine screws in the areas
circled on the motherboard.
There is a chassis intrusion con-
nector here.
AP2000 Hardware Reference Guide
Place four spacers in the ar-
eas circled on the chassis.
From chassis micro switch
Motherboard's chassis
intrusion connector
Chassis Signal
+5VSB