Panasonic BB-HCM581CE Installation Manual

Installation Guide

Network Camera
BB-HCM580
Model No.
BB-HCM581
This manual is written for both the BB-HCM580 (AC Adaptor Type) and the BB-HCM581 (PoE Ready). Available features and operations vary slightly
depending on the model. You can confirm the model no. of your camera by checking the model no. printed on the front of the camera.
Please read the included Important Information before proceeding.
Complete Operating Instructions and all other documentation can be found on the included CD-ROM.
• This document (Installation Guide) explains how to physically connect the
camera to the power supply and network, as well how to mount or place the
camera for regular use.
• The Setup Guide describes how to set up the camera so that it can be
accessed using a PC.
Abbreviations
• UPnP is the abbreviation for "Universal Plug and Play".
• The Network Camera is referred to as "the camera" in this document.
Installation Procedure Overview
The following is an overview of the steps required to install and setup the camera. All steps are explained in this document unless otherwise noted.
Preparation Camera Diagram
Confirm that you have all the Make sure you know the
items required for names of the camera's
installation. physical features.
Preparation
1. Confirm the following items are included in the camera's packaging.
Main Unit (1 pc.)
Screw A (2 pcs.)
Order No. XYN3+J6FJ
Used to secure ceiling plate A to
ceiling plate B.
Ceiling Mounting Cover (1 pc.)
Order No. PSKL1023Y2
Used when mounting the camera
on a ceiling.
Safety Wire (1 pc.)
Order No. PQME10080Z
Used to secure the camera when
mounting it.
BB-HCM580 Only
AC Adaptor (1 pc.)
Order No. PQLV202T
Cord Length: About 3 m
BB-HCM581 Only
Audio/Video Cord (1 pc.)
Order No. PSJA1103Y
2. You will need the following additional items to install and configure the camera.
– a PC (see the system requirements in the Important Information document)
– a router
Option for BB-HCM581
You can also connect the camera using the optional Panasonic BB-HCA3CE or BB-HCA3E AC adaptor. The optional AC adaptor includes the following items.
BB-HCA3CE: For use in countries/areas other than the United Kingdom
AC Adaptor (1 pc.)
Cord Length:
About 3 m
© Panasonic System Networks Co., Ltd. 2007
PQQX16052XA KK0407CM3020 (CE)
Indoor Use Only
(AC Adaptor Type)
(PoE Ready)
Connections
Connecting the camera to
your network and to the power
outlet.
AC Cord (1 pc.)
Cord Length:
About 1.8 m
Please read this document before using the product, and save this document for
future reference.
Panasonic Network Camera Website: http://panasonic.net/pcc/ipcam/
• This document can be found on the included CD-ROM. English, French, German, Italian,
Spanish, Russian, Simplified Chinese, Korean, Danish and Swedish versions are included.
• Refer to the Operating Instructions on the CD-ROM for details regarding
the camera's features.
• Refer to the Troubleshooting Guide on the CD-ROM if you have any
problems configuring or using the camera.
• The Setup CD-ROM is referred to as "the CD-ROM" in this document.
Setup
Setting up the camera (described in the included
Setup Guide). This involves configuring the camera
so that it can be accessed from a PC.
Washer S (1 pc.)
Order No. XWG26D12VW
Used when securing the safety
wire to the camera.
Screw B (5 pcs.)
Order No. XTB4+20AFJ
Used to secure ceiling plate B
(4 pcs.) and the safety wire (1 pc.)
to the ceiling.
Ceiling Plate A (1 pc.)
Order No. PQZMHCM581A
Used to secure the camera to
ceiling plate B.
Important Information (1 pc.)
Installation Guide
(this document) (1 pc.)
Setup Guide (1 pc.)
AC Cord A (1 pc.)
Order No. PFJA02A006Z
Cord Length: About 1.8 m
For use in countries/areas
other than the United Kingdom
– a LAN cable (CAT-5 straight cable)
BB-HCA3E: For use in the United Kingdom
AC Adaptor (1 pc.)
Cord Length:
About 3 m
Mounting
Mounting or placing the
camera.
Washer L (1 pc.)
Order No. XWG4F16VW
Used when securing the safety
wire to the ceiling.
Screw C (1 pc.)
Order No. PQHV2610PJ65
Used for connecting the safety
wire to the camera.
Ceiling Plate B (1 pc.)
Order No. PQMD10110Z
Used to secure the camera to the
ceiling.
Setup CD-ROM (1 pc.)
Order No. PNQC1048Z
Contains the Setup Program needed to
configure the camera, as well as the
camera's documentation.*
*See the included Important
Information for a description of
each document.
AC Cord B (1 pc.)
Order No. PSJA1106Z
Cord Length: About 1.8 m
For use in the United Kingdom
AC Cord (1 pc.)
Cord Length:
About 1.8 m
1