Installation; Hardware Installation - D-Link DCS-3010 User Manual
Hd poe fixed network camera
Hide thumbs
Also See for DCS-3010:
- Quick installation manual (65 pages) ,
- Quick install manual (13 pages) ,
- Specifications (3 pages)
Table of Contents
Advertisement
Installation
Installation
Basic Connection (without PoE)
Connect the camera to your switch or router via Ethernet cable.
Connect the supplied power cable from the camera to a power outlet.
Connection Using a PoE Switch
If using a PoE switch or router, connect the network camera via Ethernet
cable.
PoE will transmit both power and data over a single cable.
Note: Once power has been established, the LED will turn red. When the device has obtained an IP address and is accessible, the
LED will turn green.
D-Link DCS-3010 User Manual
Hardware Installation
12
Advertisement
Table of Contents
