ViewSonic PJD6211P Service Manual page 16

USB Support - Installation (All Platforms)
This release includes support for a USB communications interface to DDP2 230/DDP2430
based projectors. The setup program includes the file s needed to install USB support . After
DLP Composer ™ Lite is installed, to install the USB support, choose the "Install DLP Device
USB Driver" icon under "DLP Composer ™ Lite" in your Start menu .
Follow the instruction on the screen to press any key and wait for the installation done.
And copy the file "FlashDeviceParameters.txt
Operating procedure
1. Connect the Projector and PC via USB cable.
2. Double-click [DLP Composer (TM) Lite 9.2]. The following screen will appear.
3. Select [Edit]/ [Preferences]/ [Communications] to check USB in [Projector Interface].
4. Set the items on the [Vendor 0x451, Product 0x2000 ] of [USB Device Identification].
5. Click [OK].
ViewSonic Corporation
" into the C:\ Program Files\ DLP Composer Lite
X.X
13
Confidential - Do Not Copy PJD6211