Table of Contents
Advertisement
Zoom In/Out (Computer Mode Only)
Press the In button to digitally magnify an image up to 32 times on the screen. Press the Out button to reduce the
zoomed image.
This function cannot be used with SXGA+ and UXGA.
Freeze
Press the Freeze button to temporarily stop video motion. Press the button again to resume video motion.
Mute
Press the Mute button to mute or unmute the projector speaker.
Volume
Increases/decrease the speaker volume.
Keystone
Adjusts image distortion caused by tilting the projector. (± 16 degrees)
Enter
Activates the left mouse button when the remote control cover is closed.
On-Screen Display
The projector has a multilanguage OSD that can only be displayed when the projector is accepting an input
source.
The OSD allows you to make image adjustments and change a variety of settings. If the source is a computer,
the OSD shows the computer OSD. When using a video source, the OSD shows the video OSD. The
projector automatically detects the source.
When the OSD is on the screen, press
Example: Image-I--> Image-II--> Audio--> Language--> Management--> Image-I. To make a selection in a
tab, press
.
Press
or
to make a selection and adjust the settings by pressing
the color of the item changes from yellowish brown to blue.
Example: Brightness--> Color Temp.--> Zoom--> Contrast--> Keystone--> Brightness
To exit the OSD, press
or
to navigate through the OSD tabs.
.
or
. When an item is selected,
Advertisement
Table of Contents
