Chapter 3 Data Format; Data Space; Cylinder Configuration - Fujitsu MAU3036NC/NP Product/Maintenance Manual

CHAPTER 3
This chapter explains data space definition, logical data block addressing, and defect management on the
IDD.
3.1

Data Space

The IDD manages the entire data storage area divided into the following three data spaces.
User space: Storage area for user data
Internal test space: Reserved area for diagnostic purposes
System space: Area for exclusive use of IDD itself
The user space allows a user access by specifying data. These space can be accessed with the
logical data block addressing method described in Section 3.2. The internal test space is used by
Read/write test of self-diagnostics test, but user can't use direct access. The system space is
accessed inside the IDD at power-on or during the execution of a specific command, but the user
cannot directly access the system space.
3.1.1

Cylinder configuration

The IDD allocates cylinders to the user space, Internal test space, and system space. Figure 3.1 is
the cylinder configuration.
Spare areas (alternate areas) for defective sectors are provided in the user space. Several sectors in
the last track of one cell and several cylinders (alternate cylinders) in the user space are allocated
as alternate areas according to the user's assignment (MODE SELECT command). See Subsection
3.1.2 for details.
C141-E205
DATA FORMAT
3.1 Data Space
3.2 Logical Data Block Addressing
3.3 Defect Management
3-1