GE JT5500SFSS Dimensions And Installation Information

Junction box
location
JT5500SF
GE 30" Built-In Double Convection Wall Oven
®
Dimensions and Installation Information (in inches)
47" to
bottom of
Note: Cabinets installed adjacent to wall ovens
9-1/2"
junction box
must have an adhesion spec of at least a 194°F
temperature rating.
Door handle protrudes 3" from door face.
F
Cabinets and drawers on adjacent 45° and 90°
walls should be placed to avoid interference with
the handle.
Conduit
40"
Electric wall ovens are not approved for
installation with a plug and receptacle. They
must be hard wired in accordance with
installation instructions.
E
Installation Information: Before installing,
consult installation instructions packed with
22"
product for current dimensional data.
KW Rating
240V
8.4
D
208V
6.3
Breaker Size
240V
40 Amps
2 x 4 or
208V
40 Amps
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
28-5/8" MAX.
A
B
MAX.
Cutout width
Cutout depth
28-1/2" MIN.
23-1/2" MIN
28-5/8" MAX.
Junction box
location
B
C
47" to
bottom of
junction box
30''
30''
Cabinet
A – Overlap of oven at top of cutout
Cabinet
A – Overlap of oven at top of cutout
B – Overlap of oven over side of edges of cutout
B – Overlap of oven over side of edges of cutout
C – Overlap of oven at bottom of cutout C – Overlap of oven at bottom of cutout
Oven
Oven
D – Overall depth with handle
E – Overall height with trim
D – Overall depth with handle
F – Overall width
E – Overall height with trim
F – Overall width
For answers to your Monogram
questions, visit our website at geappliances.com
or call GE Answer Center
Cutout height
50-1/4" MIN.
without pedestal
51-13/16" MIN.
51-15/16" MAX.
with pedestal
A
Cutout height
50-1/4" MIN.
without pedestal
Recommended
51-13/16" MIN.
minimum
23" minimum
51-15/16" MAX.
cutout location door opening
with pedestal
allowance
from the floor
12"
C
Recommended
minimum
cutout location
from the floor
12"
PT7550
JT5500
JT5550
JT3500
PT7550
JT5500
30"
JT3500
Suitable
1" bracing
30"
to support
1"
3/4"
runners
3/4"
1-1/4" 1-1/4"
27-3/16"
52-5/8"
27-3/16"
29-3/4"
52-5/8"
29-3/4"
® or GE appliance
® service, 800.626.2000.
F
F
Conduit
40"
E
22"
23" minimum
door opening
allowance
D
C L
2 x 4 or
equivalent runners
level with bottom of cutout
C L
and flush with sides of cutout
or solid bottom floor.
(must support 375 lbs.)
Suitable
bracing
(must support 375 lbs.)
to support
runners
9-1/2"
MAX.
Cutout depth
Conduit 23-1/2" MIN
40"
Junction box
location
B
47" to
E
bottom of
junction box
22"
D
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
Listed by
Underwriters
Laboratories
Specification Created 2/13
320154
Cab
A –
B –
C –
Oven
D –
E –
F –