GE JT5500SF Dimensions And Installation Information

Junction box
location
JT5500SF
GE Appliances 30" Built-In Double Wall Oven with Convection
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES) 47" to
bottom of
NOTE: Cabinets installed adjacent to wall
9-1/2"
junction box MAX.
ovens must have an adhesion spec of at least a
194°F temperature rating.
Door handle protrudes 3" from door face.
Cabinets and drawers on adjacent 45° and 90°
walls should be placed to avoid interference
with the handle.
Conduit
40"
Electric wall ovens are not approved for
installation with a plug and receptacle.
They must be hard wired in accordance with
installation instructions.
E
INSTALLATION INFORMATION: Before
installing, consult installation instructions
22"
packed with product for current dimensional
data.
KW RATING
D
240V 8.4
208V 6.3
BREAKER SIZE
2 x 4 or
equivalent runners
240V 40 Amps
level with bottom of cutout
and ush with sides of cutout
208V 40 Amps
or solid bottom oor.
For answers to your Monogram, GE Café
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center
28-5/8" MAX.
A
B
Cutout width
Cutout depth
28-1/2" MIN.
23-1/2" MIN
28-5/8" MAX.
Junction box
location
A
B
C
47" to
bottom of
junction box
30''
C
30''
Cabinet
A – Overlap of oven at top of cutout
Cabinet
A – Overlap of oven at top of cutout
B – Overlap of oven over side of edges of cutout
B – Overlap of oven over side of edges of cutout
C – Overlap of oven at bottom of cutout
C – Overlap of oven at bottom of cutout
Oven
Oven
D – Install depth
E – Overall height with trim
D – Install depth
F – Overall width
E – Overall height with trim
F – Overall width
™
® Service, 800.626.2000.
Cutout height
50-1/4" MIN.
without pedestal
51-13/16" MIN.
51-15/16" MAX.
with pedestal
Cutout height
50-1/4" MIN.
without pedestal
Recommended
51-13/16" MIN.
minimum
23" minimum
51-15/16" MAX.
cutout location
door opening
with pedestal
allowance
from the oor
12"
Recommended
minimum
cutout location
from the oor
12"
PT7550
JT5500
JT5550
JT3500
PT7550
JT5500
30"
JT3500
Suitable
bracing
1"
30"
to support
1"
3/4"
runners
3/4"
1-1/4"
1-1/4"
23-1/2"
53"
23-1/2"
29-3/4"
53"
29-3/4"
Series, GE Profile ™ Series or
F
F
Conduit
40"
E
22"
23" minimum
door opening
allowance
D
C L
2 x 4 or
equivalent runners
level with bottom of cutout
C L
and ush with sides of cutout
or solid bottom oor.
(must support 375 lbs.)
Suitable
bracing
(must support 375 lbs.)
to support
runners
9-1/2"
MAX.
Cutout depth
Conduit
23-1/2" MIN
40"
Junction box
location
B
47" to
E
bottom of
junction box
22"
D
2 x 4 or
equivalent runners
level with bottom of cutout
and ush with sides of cutout
or solid bottom oor.
Dimension and
installation information
are shown in inches.
Listed by
Underwriters
Laboratories
Specification Revised 4/16
Cab
A –
B –
C –
Ove
D –
E –
F –