Gigabyte G1.Sniper 3 User Manual page 33

13) F_AUDIO (Front Panel Audio Header)
The front panel audio header supports Intel High Definition audio (HD). You may connect your chassis
front panel audio module to this header. Make sure the wire assignments of the module connector match
the pin assignments of the motherboard header. Incorrect connection between the module connector and
the motherboard header will make the device unable to work or even damage it.
30
14) CLR_CMOS (Clear CMOS Jumper)
Use this jumper to clear the CMOS values (e.g. date information and BIOS configurations) and reset the
ng
CMOS values to factory defaults. To clear the CMOS values, use a metal object like a screwdriver to touch
the two pins for a few seconds.
Voltage measurement points(G1.Sniper 3)
F_AUDIO(H)
Some chassis provide a front panel audio module that has separated connectors on each wire DB_PORT
instead of a single plug. For information about connecting the front panel audio module that has
different wire assignments, please contact the chassis manufacturer.
Voltage measurement module(X58A-OC)
PCIe power connector (SATA)(X58A-OC)
BIOS Switcher (SW4)
Always turn off your computer and unplug the power cord from the power outlet before clearing
•
the CMOS values.
After system restart, go to BIOS Setup to load factory defaults (select Load Optimized
•
Defaults) or manually configure the BIOS settings (refer to Chapter 2, "BIOS Setup," for BIOS
configurations).
Pin No. Definition
1
2
9 1
F_PANEL(NH)
3
4
10 2
5
6
7
8
9
10
BIOS Switcher (X58A-OC)
1
M_SATA
1
PWM Switch (X58A-OC)
3 2 1
DIP
DIP
1 2 3
Open: Normal
Short: Clear CMOS Values
- 33 -
MIC2_L
GND
MIC2_R
-ACZ_DET
LINE2_R
GND
FAUDIO_JD
No Pin
LINE2_L
GND
Hardware Installation
F_PANEL
(H61M-D2)
ACPI_CPT
(GA-IVB)
SMB_CPT
(GA-IVB)
CLR_CMOS
CI
DIS_ME
GP15_CPT
(GA-IVB)
XDP_CPU
XDP_PCH
(GA-IVB)