Asus P5BP-E/4L - Motherboard - ATX User Manual page 147

The Select.New.Array.Type screen apprears.
4.
Use the arrow keys to select Create.IS.Volume, then press <Enter>.
LSI Logic Config Utility v6.16.00.00 (2007.05.07)
Select New Array Type -- SAS1064E
Create IM Volume
Create IME Volume
Create IS Volume
Esc = Exit Menu F1/Shift+1 = Help
Enter = Choose array type to create
The Create.New.Array screen shows the disks you can add to make up
5.
the IS volume. Use the arrow key to select a disk, then move the cursor to
the RAID Disk column. To include this disk in the array, press <+>, <->, or
<Space>.
LSI Logic Config Utility v6.16.00.00 (2007.05.07)
Create New Array -- SAS1064E
Array Type:
Array Size(MB): 102996
Slot Device Identifier RAID Hot Drive Pred Size
Num
0
1
2
3
Esc = Exit Menu F1/Shift+1 = Help
SPACE/+/- = Select disk for array or hot spare
By default, the RAID Disk field shows No before array creation. This field is
grayed out under the following conditions:
•
•
•
•
5-44
Create Integrated Mirror Array of 2
disks plus up to 2 optional hot spares.
Data on the primary disk may be migrated.
Create Integrated Mirrored Enhanced
Array of 3 to 10 disks including up
to 2 optional hot spares.
ALL DATA on array disks will be DELETED!
Create Integrated Striping array of
2 to 10 disks.
ALL DATA on array disks will be DELETED!
SEAGATE ST373454SS
SEAGATE ST373454SS
SEAGATE ST373454SS
SEAGATE ST373454SS 0003 [Yes] [NO] ------- ---- 35003
The disk does not meet the minimum requirements for use in a RAID array.
The disk is not large enough to mirror existing data on the primary drive.
The disk has been selected as the Hot Spare for the RAID array.
The disk is already part of another array.
IS
Disk Spr Status
0003 [Yes] [NO] ------- ---- 70007
0003 [NO] [NO] ------- ---- 70007
0003 [Yes] [NO] ------- ---- 35003
C = Create array
Fail (MB)
Chapter 5: RAID configuration